further cleanup of mostly video-related code

dlist.asm

@@ -176,7 +176,6 @@ if HIRES {
     gPipeSync()
     gSetCombine(15,15,31,4,7,7,7,4, 15,15,31,4,7,7,7,4)
     gSetOtherMode(G_PM_NPRIMITIVE | G_CYC_1CYCLE | G_TP_NONE | G_TD_CLAMP | G_TL_TILE | G_TT_NONE | G_TF_AVERAGE | G_TC_FILT | G_CK_NONE | G_CD_MAGICSQ | G_AD_PATTERN, G_AC_NONE | G_ZS_PIXEL | Z_CMP | Z_UPD)
-    // CULL_FRONT is dying on N64?
     gGeometryMode(0, G_ZBUFFER | G_SHADE | G_CULL_FRONT | G_SHADING_SMOOTH)
 
     gSetSegment6(model)

inc/n64_dp.inc

@@ -15,26 +15,26 @@ constant DPS_BUFTEST_ADDR($08) // $04200008 Span Buffer Test Address Register
 constant DPS_BUFTEST_DATA($0C) // $0420000C Span Buffer Test Data Register
 
 // DPC_STATUS Read Flags:
-constant DPC_XBS($001) // Use XBUS DMEM DMA Or DRAM DMA (Bit 0)
+constant DPC_XBS($001) // Use XBUS DMEM DMA Or DRAM DMA
-constant DPC_FRZ($002) // RDP Frozen (Bit 1)
+constant DPC_FRZ($002) // RDP Frozen
-constant DPC_FLUSH($004) // RDP Flushed (Bit 2)
+constant DPC_FLUSH($004) // RDP Flushed
-constant DPC_GCL($008) // GCLK Alive (Bit 3)
+constant DPC_GCL($008) // GCLK Alive
-constant DPC_TMB($010) // TMEM Busy (Bit 4)
+constant DPC_TMB($010) // TMEM Busy
-constant DPC_PLB($020) // RDP PIPELINE Busy (Bit 5)
+constant DPC_PLB($020) // RDP PIPELINE Busy
-constant DPC_CMB($040) // RDP COMMAND Unit Busy (Bit 6)
+constant DPC_CMB($040) // RDP COMMAND Unit Busy
-constant DPC_CMR($080) // RDP COMMAND Buffer Ready (Bit 7)
+constant DPC_CMR($080) // RDP COMMAND Buffer Ready
-constant DPC_DMA($100) // RDP DMA Busy (Bit 8)
+constant DPC_DMA($100) // RDP DMA Busy
-constant DPC_CME($200) // RDP COMMAND END Register Valid (Bit 9)
+constant DPC_CME($200) // RDP COMMAND END Register Valid
-constant DPC_CMS($400) // RDP COMMAND START Register Valid (Bit 10)
+constant DPC_CMS($400) // RDP COMMAND START Register Valid
 
 // DPC_STATUS Write Flags:
-constant DPC_XBS_CLR($001) // Clear XBUS DMEM DMA (Bit 0)
+constant DPC_XBS_CLR($001) // Clear XBUS DMEM DMA
-constant DPC_XBS_SET($002) //   Set XBUS DMEM DMA (Bit 1)
+constant DPC_XBS_SET($002) //   Set XBUS DMEM DMA
-constant DPC_FRZ_CLR($004) // Clear FREEZE (Bit 2)
+constant DPC_FRZ_CLR($004) // Clear FREEZE
-constant DPC_FRZ_SET($008) //   Set FREEZE (Bit 3)
+constant DPC_FRZ_SET($008) //   Set FREEZE
-constant DPC_FLUSH_CLR($010) // Clear FLUSH (Bit 4)
+constant DPC_FLUSH_CLR($010) // Clear FLUSH
-constant DPC_FLUSH_SET($020) //   Set FLUSH (Bit 5)
+constant DPC_FLUSH_SET($020) //   Set FLUSH
-constant DPC_TMC_CLR($040) // Clear TMEM COUNTER (Bit 6)
+constant DPC_TMC_CLR($040) // Clear TMEM COUNTER
-constant DPC_PLC_CLR($080) // Clear PIPELINE COUNTER (Bit 7)
+constant DPC_PLC_CLR($080) // Clear PIPELINE COUNTER
-constant DPC_CMC_CLR($100) // Clear COMMAND COUNTER (Bit 8)
+constant DPC_CMC_CLR($100) // Clear COMMAND COUNTER
-constant DPC_CLK_CLR($200) // Clear CLOCK COUNTER (Bit 9)
+constant DPC_CLK_CLR($200) // Clear CLOCK COUNTER

inc/n64_vi.inc

@@ -25,10 +25,10 @@ constant DIVOT_EN($0010) // Divot Enable (Used With Anti-alias)
 constant VBUS_CLK_EN($0020) // Video Bus Clock Enable
 constant INTERLACE($0040) // Interlace/Serrate (Used With Interlaced Display)
 constant TST_MODE($0080)  // Test Mode
-constant AA_MODE_0($0000) // AA Mode 0 = Anti­-alias & Resample (Always Fetch Extra Lines)
+constant AA_MODE_0($0000) // AA Mode 0 = Anti­alias & Resample (Always Fetch Extra Lines)
-constant AA_MODE_1($0100) // AA Mode 1 = Anti­-alias & Resample (Fetch Extra Lines When Needed)
+constant AA_MODE_1($0100) // AA Mode 1 = Anti­alias & Resample (Fetch Extra Lines When Needed)
 constant AA_MODE_2($0200) // AA Mode 2 = Resample Only
-constant AA_MODE_3($0300) // AA Mode 3 = Replicate Pixels & No Interpolation
+constant AA_MODE_3($0300) // AA Mode 3 = Replicate Pixels & No Interpolation
 constant DIAG_0($0400) // Diagnotic 0
 constant DIAG_1($0800) // Diagnotic 1
 constant PIXEL_ADV_0($0000) // Pixel Advance 0

init.asm

@@ -5,7 +5,7 @@
 -
     ld      t3, 0(t1)
     ld      t4, 8(t1)
-    addiu   t1, t1, 0x10
+    addiu   t1, 0x10
     sd      t3, 0(t0)
     sd      t4, 8(t0)
     cache   0x19, 0(t0) // tell data cache to write itself out
@@ -13,7 +13,7 @@
     // an instruction cache line is 2 rows, and a data cache line is 1 row,
     // so poking at the start of each row is enough to flush them both.
     bne     t1, t2,-
-    addiu   t0, t0, 0x10
+    addiu   t0, 0x10
 
     // flush denormals to 0 and enable invalid operations
     li      a0, 0x01000800 // TODO: use flag constants
@@ -44,7 +44,7 @@
     tlbwi
     nop
     nop
-    subiu   t1, t1, 1
+    subiu   t1, 1
     bgez    t1,-
     nop
     mtc0    r0, CP0_EntryHi
@@ -82,7 +82,7 @@
     lui     t2, PI_BASE
 -
     lw      t0, PI_STATUS(t2)
-    andi    t0, t0, 3
+    andi    t0, 3
     bnez    t0,-
     nop
     //

main.asm

@@ -1,4 +1,3 @@
-// built on the N64 ROM template by krom
 arch n64.cpu
 endian msb
 
@@ -11,7 +10,7 @@ include "inc/kernel.inc"
 output "test.z64", create
 fill 1052672 // ROM size
 
-origin 0x00000000
+origin 0
 base 0x80000000
 
 include "header.asm"
@@ -93,7 +92,7 @@ Start3D:
 
     lui     a0, MAIN_BASE
     jal     PushVideoTask
-    ori     a0, a0, MAIN_SP_TASK
+    ori     a0, MAIN_SP_TASK
 
     SP_DMA_WAIT()
 
@@ -174,8 +173,6 @@ if MAIN_DECOMP_IMAGE {
 include "dlist.asm"
 include "task.asm"
 
-//align(16); insert FONT, "res/dwarf.1bpp"
-
 if pc() > (MAIN_BASE << 16) {
     error "ran out of memory for code and data"
 }